Setting up a tent: If there is a ground cloth, spread the ground cloth under the tent.
Create an internal account:
1. Choose a flat surface. Remove debris such as branches, rocks, etc., that may cause damage to the tent bottom and tent.
2. Open the tent storage bag and take out the tent bag. Unfold and assemble the two folded tent poles. Make sure the adjacent tent sections are fully assembled.
3. Lay the inner tent flat on the ground, with the side with the door facing the direction you want to face (usually the leeward direction).
4. Take out the four tent nails, and in accordance with the principle of fully tensioning the inner tent along the hypotenuse and side edges, pass the four tent nails through the webbing pull-loops at the four corners of the inner tent in turn, and insert them diagonally to the ground. inside the tent to complete the inner tent. Accounts are fixed.
Note: The angle of the ground nail into the ground is about 45° to the ground, and it should be as deep as possible.
5. Pass the assembled two tent poles through the inner tube diagonally, so that the center of each tent pole is located in the center of the inner tent.
6. Insert one end of the head into the metal grommet in the nearby corner, then apply gradual force on the other end of the corner to bend the rod until the head is inserted into the corresponding metal grommet in the corner.
7. Repeat this operation to complete the fixing operation of the second tent pole.
8. Stand up the two fallen tent poles, and hang the black plastic hooks on the diagonal of the inner tent on the corresponding tent poles.
9. Check whether the position of the account pin initially inserted into the corner of the inner account is appropriate. If there is a problem, it can be readjusted to ensure that the bottom of the inner tent is fully expanded.
10. The establishment of the internal account is completed.
Create an external account:
1. Take out the tent. Open the outer tent completely, align the opening of the door with the inner tent, cover the inner tent with the coated surface (the inner side of the outer tent, smooth to the touch) facing down, and adjust the position of the outer tent so that it basically completely covers the inner tent.
2. Connect the small hooks on the four corners of the outer tent to the D-rings at the four corners of the inner tent.
3. Take out and untie the rope. Tie the free end of each tent rope to the webbing tab of the outer tent, adjust the adjustment rope buckle, place the end of the tent rope 1.5 meters away from the tent, and fix it with tent nails as before.
4. The outer tent has two ventilation windows. Lift the stand when ventilation is required, and glue it on when not in use.
At this point, the tent construction is basically complete. In addition, you can flexibly choose whether to use an external tent according to the weather conditions, so as to reduce the carrying weight and increase the comfort.
Arcadia Camp & Outdoor Products Co., Ltd. is one of the leading outdoor product manufacturers with 20 years of experience in the field, specializing in the design, manufacture and sale of trailer tents, rooftop tents, camping tents, fishing tents, shower tents , products for backpacks, sleeping bags, mats and hammocks.
Post time: Aug-19-2022